Language:
Join us on:
Subscribe
Contact
Toggle Navigation
Main Menu
Home
Company
Our Story
Insisting upon reliability, worthiness and quality from all our products
Design & Craftmanship
Intricately built, tested robustly
Environment & Community
Laser Quantum's consideration for the environment
Biographies
Meet the experts that lead our company
Our partners
Combining expert knowledge in every project
Your career
Achieve success in a great environment
Bright Venture
Products
Continuous Wave
Blue Lasers
gem 473 : 100 - 500 mW
ventus 473 : 50 - 350 mW
Green Lasers
finesse : 4 - 16 W
finesse pure : 4 - 16 W
finesse pure CEP : 4 - 16 W
gem 532 : 50 - 2000 mW
opus 532 : 2 - 6 W
torus 532 : 50 - 750 mW (SLM)
ventus 532 : 50 - 1500 mW
ventus solo : 50 - 750 mW
IR Lasers
opus 1064 : 500 mW - 10 W
Red Lasers
axiom 660 : 3 - 6 W
gem 660 : 50 - 1000 mW
gem 671 : 50 - 750 mW
opus 660 : 1 - 1.5 W
torus 660 : 50 - 200 mW (SLM)
ventus 660 : 50 - 750 mW
ventus 671 : 50 - 500 mW
Single Longitudinal Mode Lasers
torus 532 : 50 - 750 mW (SLM)
torus 660 : 50 - 200 mW (SLM)
Yellow Lasers
gem 561 : 50 - 1000 mW
ventus 561 : 50 - 350 mW
Femtosecond
gecco - 70 to 110 MHz
gecco ultra : ~800 nm, 80 MHz (70-110 MHz options), 600 mW, <15 fs Laser
gecco power : ~800 nm, 80 MHz (70-110 MHz options), 1000 mW, <20 fs Laser
gecco one : ~800 nm, 80 MHz (70-110 MHz options), 600 mW, <20 fs Laser
venteon - few-cycle pulses
venteon dual : 80 MHz, >200 mW, dual output, <5.5 fs OPCPA Seed Laser
venteon CEP5 : 80 MHz, octave-spanning, >220 mW, <5.5 fs CEP Stabilized Laser
venteon ultra : 80 MHz, octave-spanning, >240 mW, <5 fs Laser
venteon power : 80 MHz, ~800 nm, >560 mW, <7.5 fs Laser
venteon one : 80 MHz, ~800 nm, >240 mW, <7.5 fs Laser
venteon boost : 80 MHz, >900 mW, <10 fs Laser
helixx - 250 MHz
helixx : 720 nm to 920 nm (tuneable), 2.3 W, 50 fs laser
taccor - 1 GHz to 10 GHz
taccor ultra : 1 GHz, ~800 nm, 1.6 W, <20 fs Laser
taccor comb : Sealed frequency comb module
taccor x10 : 10 GHz, ~800 nm, >1 W, <50 fs Laser
taccor GHz OPO : Optical parametric oscillator system for pumping with 1 GHz femtosecond laser
taccor power : 1 GHz, ~800 nm, <1.8 W, <30 fs Laser
taccor tune : 1 GHz, 740 nm to 930 nm, 1.6 W, <80 fs Laser
taccor one : 1 GHz, 740 nm to 920 nm, <1.6 W, <60 fs Laser
HarmoniXX SHG - Second Harmonic Generator optimised for GHz rep rates
OPCPA - few-cycle 15µJ
venteon OPCPA : 200 kHz - 4 MHz, >3 W, >15 µJ - >0.75 µJ, <8 fs Complete OPCPA System
venteon pre-amp2 : 0.3-80 MHz, 1030 nm, Energy Scaling and picking
venteon pre-amp1 : 80 MHz, 1030 nm, Energy Scaling
Fibre amplification
venteon pre-amp2 : 0.3-80 MHz, 1030 nm, Energy Scaling and picking
venteon pre-amp1 : 80 MHz, 1030 nm, Energy Scaling
ASOPS Engine
ASOPS Engine : 84 MHz and High-Speed 1 GHz ASOPS Time-Domain System
CEP stabilised systems
venteon CEP5 : 80 MHz, octave-spanning, >220 mW, <5.5 fs CEP Stabilized Laser
venteon OPCPA : 200 kHz - 4 MHz, >3 W, >15 µJ - >0.75 µJ, <8 fs Complete OPCPA System
Frequency Combs
taccor comb : Sealed frequency comb module
Photonics Essentials
venteon vCHIRP : Dispersive propagation simulation software
Monolithic Periscope
Glass Wedge mounting Adapter
Glass Wedges for Dispersion Fine Tuning
Enhanced Silver Mirror
DCM12 GVD 400-700 nm
DCM9 GVD 450-950 nm
DCM11 GVD 650-1050 nm
HarmoniXX SHG - Second Harmonic Generator optimised for GHz rep rates
DCM7 GVD 600-1200 nm
DCM10 GVD 500-850 nm
RemoteApp Laser Control Software : Local or internet laser control and connection to support
venteon vWaistwatcher : Optical setup and laser cavity design software
Rectangular Optics Mount
Pulse Management
USB Spectrometer : Broadband scanning spectrometer, 610-1700 nm
TL-1000 : Timing and repetition rate stabilisation unit
venteon SPIDER : 5-30 fs , 600-1100 nm bandwidth, ±1000 fs Chirp range
HarmoniXX SHG - Second Harmonic Generator optimised for GHz rep rates
TL-1000-ASOPS : Repetition rate offset stabilisation unit
THz Technology
Tera-SED : Large area THz emitters
HASSP-THz : High resolution fully integrated THz spectrometer
Options & Customisation
Cooling Options
Fibre Coupling
Modulation
Polarisation Choices
RemoteApp Control Software
Instruments & Accessories
Pulse Timing Options
TL-1000 : Timing and repetition rate stabilisation unit
TL-1000-ASOPS : Repetition rate offset stabilisation unit
Software
RemoteApp Laser Control Software : Local or internet laser control and connection to support
venteon vCHIRP : Dispersive propagation simulation software
venteon vWaistwatcher : Optical setup and laser cavity design software
Online vChirp trial
venteon Optics and Mechanics
DCM10 GVD 500-850 nm
DCM11 GVD 650-1050 nm
DCM12 GVD 400-700 nm
DCM7 GVD 600-1200 nm
DCM9 GVD 450-950 nm
Enhanced Silver Mirror
Fixed Mirror Mount
Glass Wedge mounting Adapter
Glass Wedges for Dispersion Fine Tuning
Monolithic Periscope
Rectangular Optics Mount
View all Products
Product & Application Selectors
Continuous Wave Selector
Femtosecond Selector
Application Selector
Applications
Sales
Europe
North America
South America
Asia
Middle East
Support
FAQs
Continuous Wave
Femtosecond
'How to' Videos
Manuals & Guides
Blog/Videos
Blog
Videos
Contact
Support
Manuals/Guides
Home
Support
Manuals & Guides
View, download and print product-specific manuals and guides.
Please select a product from the list below:
gem 473
gem 532
gem 660
gem 671
torus 532
ventus 532
finesse pure
finesse
opus 532
torus 660
taccor one
taccor ultra
taccor tune
HASSP-THz
TL-1000
TL-1000-ASOPS
opus 660
gem 561
ventus solo
ventus 473
ventus 561
ventus 660
ventus 671
opus 1064
taccor power
taccor x10
taccor comb
axiom 660
Find my Manual
Top
