BLOG
LATEST NEWS FROM LASER QUANTUM

Month: January 2017

1 GHz Laser Quantum laser and finesse pure CEP used to create a frequency comb

Recently published work by Brigham Young University, Utah, USA, has been conducted using Laser Quantum’s 1 GHz laser (gigajet) alongside its finesse pure CEP laser to create a frequency comb. Frequency combs are instrumental to precise laser frequency measurements and have led to giant steps forward in research in applications including; metrology, atomic clocks, laser [...]
January 31st, 2017 | Applications, Company News

Stimulated Raman scattering in laser technology

Stimulated Raman scattering (SRS) is a third-order nonlinear optical effect that is used in laser technology either to shift the wavelength emission of a laser (‘Raman laser’) or to provide optical amplification of an input beam (‘Raman amplifier’). Since the early 2000s, Raman amplifiers have been widely used in optical fibres for telecom applications, such [...]
January 27th, 2017 | Applications, Company News

Using the ventus in Laser Tweezers Raman Spectroscopy (LTRS)

Unfortunately, one in two people born after 1960 in the UK will be diagnosed with some form of cancer during their lifetime. Typical large-scale analysis of cancer cells means individual cell attributes are averaged and, therefore, single cell detection is of real interest. The current process involves individual analysis of manually trapped cells which is [...]
January 23rd, 2017 | Applications, Company News

Have you seen the gem vs. the wacker plate yet?

Last week was the launch of our latest video from our ‘Robust and Reliable’ laser series. In this video we test the gem laser’s ability to survive after the ultimate vibration test: buried in sand and flattened with a wacker plate, an instrument used by builders. The gem laser felt the force and power from [...]
January 19th, 2017 | Company News, Videos

Meet us at Photonics West, booth #311

Planning is well underway for this year’s Photonics West at our LQ Head Quarters in Stockport. We have been working hard to ensure we bring you the very latest research and development from our ultrafast and continuous wave product ranges, and we will be displaying a number of systems on the booth. Visit us, #311, [...]
January 17th, 2017 | Company News, Events

Video launch! The gem vs. the wacker plate

The gem is a compact laser from our continuous wave range; it has been faced with a number of challenges over the previous months to demonstrate its robustness and reliability. After battling with (and winning against) a Range Rover, gravity and Arctic conditions, the gem is being put through its paces yet again. This time [...]
January 10th, 2017 | Company News, Top Stories, Videos

Product of the month – ventus 532

A scientific, compact laser, designed to meet your application needs with its unrivalled size and power up to 1.5 W. The ventus 532 is the go to laser in the scientific community, with noise less than 0.15% RMS, power stability at 0.4% RMS and spectral bandwidth at 30 GHz. The ventus is highly sought after [...]
January 5th, 2017 | Company News

Photonics West – see you there!

In less than a month we will be exhibiting at Photonic West 2017. Come and visit our booth #311 between January 28th and February 2nd where we will be exhibiting a range of our continuous wave and ultrafast lasers. Highlighting; the taccor comb, a 1 GHz turn-key Ti:S complete frequency comb system; the venteon OPCPA, [...]
January 3rd, 2017 | Company News, Events

Top