The taccor family offers a range of femtosecond lasers with a repetition rate of 1 GHz. They are all turn-key products that combine the pump laser and oscillator in a compact mono-block design that greatly reduces the maintenance needs compared to other similar designs.
1 and 10 GHz femtosecond lasers with a compact mono-block design that greatly reduces maintenance needs.
taccor Power
The taccor power is designed and tuned to offer the highest power for the configuration, up to 1.8 W.
taccor Tune
A tuneable wavelength for applications where different wavelengths is required. Controlled via a simple touch-screen control (or software) to alter the output wavelength.
taccor X10
A turn-key femtosecond laser with a 10 GHz repetition rate, delivering more than 1 W of average power in pulses as short as 50 fs.
power 6 >1000 mW power 10 >1800 mW
tune 10 > 1800 mW1
>1000 mW
nominal 800 nm (+/-20 nm)
740 nm to 910 nm (tuneable)3
nominal 830 nm (+/-30 nm)
<30 fs
<80 fs
<50 fs
> 23 nm
-15 nm
> 15 nm
1 GHz
10 GHz
0.8 nJ to 1.8 nJ
1.3 nJ - 1.8 nJ taccor tune 10
>100 pJ
0.8 mm +/-0.3 mm
0.7mm +/-0.3 mm
<1%
<0.05%
> 100:1
Horizontal
21° C ± 5° C
*Laser Quantum operates a continuous improvement programme which can result in specifications being improved without notice.
1: The value stated is for ~800nm and will vary across the tuning range.
2: Measured as the spectral centroid.
3: Choose between blue (740-880nm) and red (780-910nm) tuning range upon order.
4: Achieved using optional extra cavity dispersion compensation.
5: Noise bandwidth 1 Hz to 1MHz.
6: FWHM beam diameter at laser exit.
7: Repetition rate accuracy +/-100kHz (+/-25MHz for taccor x10). Other repetition rates available upon request.
8: Measured over 8 hours after cold start within operating temperature range.
